Was this Document Helpful? Cisco Router Basics.
Optional Displays a list of all IP address conflicts. One benefit of running DHCP on a routers is that it doesn't require any extra hardware like a Windows server does.
Router config ip dhcp database url [ timeout seconds write-delay seconds ].
Optional Specifies a hexadecimal value for full relay information option. PDF - Complete Book 6. Device dhcp-config netbios-name-server 172.
R3 dhcp-config dns-server 192. Router show ip dhcp import.
Router config ip dhcp ping timeout milliseconds. One IP address is required; however, you can specify up to eight IP addresses in one command line. If the DHCP address allocation is disabled, perform the task described in this section to reenable this capability.
Restrict S... Device show ip dhcp import.
These files are read-only. When the DHCP server receives an address assignment request, it looks for an available IP address in the primary subnet. In some networks, it is necessary to use additional information to further determine which IP addresses to allocate.
When IP addresses in the primary subnet are exhausted, the DHCP server inspects the secondary subnets in the order in which the subnets were added to the pool. Attributes from network 172.
If this command is not configured for a class, the default value is the entire subnet of the pool. Possible false conflicts can occur causing the address to be removed from the address pool. Configuration parameters and other control information are carried in tagged data items that are stored in the options field of the DHCP message.
Related Cisco Community Discussions. If the interface has secondary IP addresses, the subnets associated with the secondary IP addresses are examined for possible allocation only after the subnet associated with the primary IP address on the interface is exhausted. The root of the tree is the address pool for natural networks, branches are subnetwork address pools, and leaves are manual bindings to clients.
Cisco Router Modes. The address is not assigned until the administrator resolves the conflict. Specifies the static IP address.